Gamma playback, Copying an image from tape to card – Sharp VL-NZ100S User Manual

Page 51

Advertising
background image

Useful Features

40

Gamma Playback

Available mode:

TAPE-VCR

The gamma playback function improves the
playback picture in TAPE-VCR mode by
increasing the brightness of the subject while
leaving the brighter portions of the image
unaffected.

During playback in TAPE-VCR mode, press the
GAMMA/BRIGHTER button once.
• “GAMMA1” appears, and the picture becomes

brighter.

To obtain a brighter picture, press the GAMMA/
BRIGHTER button again.
• “GAMMA2” appears.

To cancel Gamma Playback

Press the GAMMA/BRIGHTER button until
“GAMMA1” and “GAMMA2” disappear.

Note:
Gamma Playback has no effect during still

playback.

A UD I O

A UD I O

2

1 +

2

1 +

GAMMA 1

GAMMA 1

GAMMA 2

GAMMA 2

A UD I O

A UD I O

2

1 +

2

1 +

Copying an Image from
Tape to Card

Available mode:

TAPE-VCR

You can capture your favourite image frame
from a video tape recording and save it on
card.

1

Insert the recorded Mini DV cassette
and a card in the camcorder.

2

Set the camcorder to TAPE-VCR mode,
then begin tape playback.

3

Press m on the Operation button at the
point where the desired image appears.

• A still picture of the image is displayed.

Note:
• To cancel the still picture, press m again.

4

Press the STILL button to copy the
image to the card.

• The S indicator flashes red while the

image is copied.

A UD I O

D I O

A UD I O

2

1 +

2

1 +

CARD

A UD I O

A UD I O

2

1 +

2

1 +

GAMMA/BRIGHTER
button

VL-NZ100H-038-041

02.2.14, 10:01 AM

40

Advertising