Sharp VL-NZ100S - Manual (Page 76)

Digital Still Camera Features
Playback
Digital Still Camera
Features
65
Transferring Data on
Card to Computer
Using the supplied USB cable, you can
transfer still images to a computer.
System Requirements
• Microsoft Windowsb 98, Windowsb 98 Second
Edition, Windowsb 2000 Professional, Windowsb
Me or Windowsb XP operating system
• USB terminal
• CD-ROM drive (for driver installation)
• Mouse or other pointing device
Preparation
1
Turn on the PC.
2
Connect the camcorder to the PC with
the supplied USB cable as shown below.
3
Set the Media Selection switch to CARD.
4
Hold down the Lock button and set the
Power switch to VCR.
Note:
• When you connect the USB cable for the first
time, you need to install the USB driver. The
installation procedure varies depending on your
PC operating system. Find your operating
system and follow the steps in “Installing the
USB driver”.
Installing the USB driver
• In the examples below the CD-ROM drive
letter is taken as “R:”. Select the correct drive
letter according to your operating environ-
ment.
Windows 98/98 SE
1
“Add New Hardware Wizard” appears
after performing “Preparation”.
2
Insert the CD-ROM containing the USB
driver into the CD-ROM drive, then click
“Next”.
3
Select “Search for the best driver for
your device.”, then click “Next”.
4
Select “Specify a location:”, and specify
“R:\WIN98”, then click “Next”.
5
Check the message, then click “Next” to
begin installation.
6
Click “Finish” to complete the installa-
tion.
Windows 2000
For installing the USB driver, you need to
log in as the system administrator.
1
“Found New Hardware Wizard” appears
after performing “Preparation”, then
click “Next”.
2
Select “Search for a suitable driver for
my device”, then click “Next”.
3
Select “Specify a location”, insert the
CD-ROM containing the USB driver into
the CD-ROM drive, then click “Next”.
4
Specify “R:\WIN2KXP”, then click “OK”.
5
Check the message, then click “Next” to
begin installation.
6
Click “Finish” to complete the installa-
tion.
To USB terminal
USB cable (supplied)
To USB terminal
VL-NZ100H-059-067 02.2.14, 10:04 AM 65