Sony KDP-51WS550 - Manual (Page 28)

27
SETU
P
Set
up
S
E
TU
P
SETU
P
S
E
TU
P
SETU
P
Notes on Using This Connection
To Do This ... Do This ...
Watch cable (unscrambled)
channels Press TV/VIDEO repeatedly to select the cable input (CABLE in the
illustration).
Watch cable box (scrambled)
channels Turn on the VCR and tune it to the channel the cable box is set to (usually
channel 3 or 4). Press
TV/VIDEO repeatedly to select the VCR input (VIDEO 1
in the illustration). Use the cable box to change channels.
Watch the VCR Press TV/VIDEO repeatedly to select the VCR input (VIDEO 1 in the
illustration).
Set up the TV remote control
to operate the cable box or
VCR If you have a non-Sony VCR, you must program the remote control. See
“Programming the Remote Control” on pages 49-50.
Activate the remote control to
operate the cable box or VCR For the cable box, press SAT/CABLE FUNCTION . For the VCR, open the outside
cover, as shown on page 48. Then set the A/V slide switch to the position
you programmed for the VCR.
Control specific cable box and
VCR functions with the TV
remote control See “Operating a Cable Box” on page 52 and “Operating a VCR” on page 51.
Label video inputs to easily
identify equipment connected
to the TV See the instructions for setting up Video Labels on pages 103-104.
VIDEO IN
HD/DVD IN
MONITOR
OUT
AUDIO
OUT
(VAR/FIX)
(1080i/720p/480p/480i)
1 3 4 5 6
7
DVI - HDTV IN
L
R
AUDIO
VIDEO
TS/DV/MICROMV
CONTROL S
OUT IN
L
R
AUDIO
(MONO)
S VIDEO
VIDEO
L
R
AUDIO
P B
P R