Sony KDP-51WS550 - Manual (Page 90)

89
SETU
P
i.LIN
K
S
E
TU
P
SETU
P
S
E
TU
P
i.LIN
K
i.LINK Setup
You can use the i.LINK Control Panel to access digital setup options,
some of which are also available through the Digital Program Guide
(described on page 63).
To Do This ... Do This ...
Set up the selected device Move the joystick to highlight Setup and press .
Set up Caption Vision Once i.LINK Setup has been selected, move the joystick to Caption Vision , and
press .
✍
For details about setting up Caption Vision , see “Using the Caption Vision
Menu” on page 65.
Set up i.LINK Analog Video
(Set-Top Box) The TV is able to accept an analog signal from a selected set-top box. The
set-top box must be EIA-775A compliant and must be connected to the TV’s
VIDEO 3 input. To associate the device with the TV's analog VIDEO 3 input,
move the joystick to
Analog Video and press . All EIA-775A-compliant
devices will be shown in the list. Select the desired device from the list and
press .
Notes on i.LINK
❑ The TV can act as an i.LINK repeater, so that i.LINK signals can be relayed to another
device even when the TV is powered off. To enable this feature, set the
i.LINK Standby option
to On using the Setup Menu as described on page 103.
❑ Parental Control settings apply to the signal from a selected device. For more details, see
page 100.
Using_iLINK.fm Page 89 Thursday, May 15, 2003 6:12 AM