Setting up the channel list, Using auto program – Sony KDP-51WS550 User Manual
Page 42
41
SETU
P
Set
up
S
E
TU
P
SETU
P
S
E
TU
P
SETU
P
Setting Up the Channel List
After you finish connecting the TV, you need to run the Auto
Program feature, which automatically creates a list of available
analog and digital channels. The Auto Program screens appear when
you turn on your TV for the first time after hooking it up.
Using Auto
Program
To run Auto Program the first time you turn on your TV
1
Press
POWER
to turn on the TV.
The Initial Setup screen appears.
2
Using the joystick on the remote control, move the highlight to
the desired language, then press
to select that language.
3
When prompted to start Auto Program, press
to select
Yes
.
Auto Program takes several minutes to complete. A progress bar is
displayed while the channel list is being created.
To run Auto Program again at a later time
❑
Use the Auto Program feature as described on page 98.
To add individual digital channels
❑
Use the Digital Channel feature as described on page 98.
To reset the TV to factory settings
1
Press
POWER
to turn on the TV.
2
Hold down
RESET
on the remote control.
3
Press
TV POWER
on the TV. (The TV will turn itself off, then back
on.)
4
Release
RESET
.
AX1 PJ.book Page 41 Wednesday, April 30, 2003 2:13 PM