Sony KDP-51WS550 - Manual (Page 30)

29
SETU
P
Set
up
S
E
TU
P
SETU
P
S
E
TU
P
SETU
P
Notes on Using This Connection
To Do This ... Do This ...
View (monitor) what is being
recorded Press TV/VIDEO repeatedly to select the VCR input (VIDEO 1 in the
illustration above).
Set up the TV remote control
to operate the VCR(s) If you have a non-Sony VCR, you must program the remote control. See
“Programming the Remote Control” on pages 49-50.
Activate the TV remote
control to operate the VCR(s) Open the outside cover, as shown on page 48. Then set the A/V slide switch
to the position you programmed for the VCR.
Control VCR functions with
the TV remote control See “Operating a VCR” on page 51.
Label video inputs to easily
identify equipment connected
to the TV See the instructions for setting up Video Labels on pages 103-104.
AX1 PJ.book Page 29 Wednesday, April 30, 2003 2:13 PM