Sony KDP-51WS550 - Manual (Page 45)

44
SETU
P
SETU
P
S
E
TU
P
SETU
P
Set
up
SETU
P
Notes on
Adjusting the
Convergence
Manually ❑ Allow the TV to warm up for about 30 minutes before you adjust
the convergence.
❑ For best results, stand about 3 to 5 feet back from the picture
when adjusting the convergence. Begin with the crosses in the
center area of the screen and, once those are adjusted, move to the
crosses on the edges of the screen.
❑ You can make separate adjustments to each wide mode:
Full/Normal , Zoom , Wide Zoom , and Memory Stick/1080i high-
definition input. (These features share a common convergence
mode.) The cross pattern looks different in each of these, but the
adjustment procedure is the same. Press the
WIDE MODE button on
the remote to toggle through the wide mode screens.
❑ To optimize the conditions for convergence adjustment, in the
Video Menu, set
Mode to Pro or Movie and lower the Picture level
settings (see page 92). You can reset the adjustments by pressing
the
RESET button on the remote control.
AX1 PJ.book Page 44 Wednesday, April 30, 2003 2:13 PM