Sony KDP-51WS550 - Manual (Page 50)

49
SETU
P
SETU
P
S
E
TU
P
Rem
o
te
Con
tr
ol
S
E
TU
P
SETU
P
Programming the Remote Control
The remote control is preset to operate Sony brand video equipment.
If you have video equipment other than Sony brand that you want to
control with the TV’s remote control, use the following procedure to
program the remote control.
1 Turn to the list of “Manufacturer’s Codes” on page 50, and find
the three-digit code number for the manufacturer of your
equipment. (If more than one code number is listed, use the
number listed first.)
2 Open the remote control and set the A/V slide switch to i.LINK/AV1 ,
AV2 , AV3 , or DVD . Then close the remote control.
3 Press CODE SET.
4 Enter the three-digit manufacturer’s code number.
5 Press ENTER .
6 To check if the code number works, aim the TV’s remote control
at the equipment and press the
POWER button that corresponds
with that equipment. If it responds, you are done. If not, try using
another code listed for that manufacturer.
Notes
❑
If more than one code number is listed, try entering them one by
one until you come to the correct code for your equipment.
❑ If you enter a new code number, the code number you previously
entered at that setting is erased.
❑ In some cases, you may not be able to operate your equipment
with the supplied remote control. In such cases, use the
equipment’s own remote control unit.
❑ Whenever you remove the batteries to replace them, the code
numbers may revert to the factory setting and must be reset.
Sony Equipment Switch Position on
Remote Control Programmable Code
Number
i.LINK i.LINK/AV1 901
8 mm VCR AV2 302
VHS VCR AV3 301
DVD player DVD 751
✍
The equipment must have infrared (IR) remote capability in order to be used
with the remote control.
✍
If the device that you wish to program is connected through i.LINK, you
must set the slide switch to AV1.
✍
You must do step 5 within 10 seconds of step 4, or you must redo
steps 3 through 5.
MODE PALETTE
MEMORY STICK
DISPLAY RESET
FAVORITES GUIDE
JUMP
FREEZE EXIT
CODE SET
MENU
CH VOL
WIDE MODE
INDEX
ENTER
ANT TV/VIDEO PIC MODE
TV SAT/CABLE
FUNCTION
MUTING SLEEP SAT/CABLE POWER
RM-Y192
TWIN VIEW
DRC
TV
i.LINK
FLIP OPEN
3
5
2
SYSTEM
OFF
MUTING SLEEP SAT/CABLE POWER
TV/VCR VCR/DVD
MTS/SAP
SELECT
DISC MENU MENU
WIDE MODE
INDEX TWIN VIEW
i.LINK
AX1 PJ.book Page 49 Thursday, May 1, 2003 11:34 AM