Siemens ESM - Manual (Page 4)

Copyright Siemens AG 2000/02, All rights reserved
The reproduction, transmission or use of this document or its
contents is not permitted without express written authority.
Offenders will be liable for damages. All rights, including rights
created by patent grant or registration of a utility or design, are
reserved. Disclaimer
We have checked the contents of this manual for agreement with
the hardware and software described. Since deviations cannot be
precluded entirely, we cannot guarantee full agreement. However,
the data in this manual are reviewed regularly and any necessary
corrections included in subsequent editions. Suggestions for
improvement are welcome.
Siemens AG
Automation and Drives
Postfach 48 48, D-90327 Nuernberg
C79000-Z8976-C068-10
© Siemens AG 2001/2003
Technical data subject to change.
Siemens Aktiengesellschaft Printed in the Federal Republic of Germany
Correct Usage of Software Products
Please note the following regarding the correct usage of software products:
Caution
This software may only be used for the applications described in the catalog or the
technical description, and only in connection with devices or software products from
other manufacturers which have been approved or recommended by Siemens.
Before you use the supplied sample programs or programs you have written yourself,
make certain that no injury to persons nor damage to equipment can result in your
plant or process.
Prior to Startup
Before putting the product into operation, note the following warning:
Caution
Prior to startup you must observe the instructions in the relevant documentation. For
ordering data of the documentation please refer to the catalogs or contact your local
SIEMENS representative.