Sharp UX-B800 - Manual (Page 23)

Storing E-mail Addresses
21
2. Scan to
E-mail
•
If you did not select a Rapid Key or
Speed Dial number in Step 2, the
display will show the next available
Rapid Key or Speed Dial number. If
that number is acceptable, press
and go to Step 8. If not, press
the desired Rapid Key, or press the
A, B, or C key, or press and
enter the desired 2-digit Speed Dial
number, and go to Step 8.
8 Return to Step 2 to store another e-
mail address, or press to exit.
Editing and clearing stored
e-mail addresses
To make changes to a previously stored
e-mail address, or to clear an address,
follow these steps:
1 Press , , then .
2 Press the key in which the address
is stored (Rapid Key or A, B, or C
key), or press and enter the
2-digit Speed Dial number in which
the address is stored.
(You can also press or
until the name or address appears
and press .)
Display: [1=EDIT, 2=CLEAR]
SPEED DIAL
STOP
FUNCTION
SPEED DIAL
3 Press for EDIT or for
CLEAR.
•
If you selected CLEAR, go to Step 8.
4 If you selected EDIT, make the
desired changes to the address.
•
Press or to move the
cursor to the character(s) you wish to
change, and then press the
appropriate letter or number key. The
new character will replace the old
character.
•
If you do not wish to change the
address, go directly to Step 5.
5 Press .
6 Make the desired changes to the
name.
•
If you do not wish to change the
name, go directly to Step 7.
7 Press .
8 Return to Step 2 to edit or clear
another address, or press to
exit.
STOP
all.book Page 21 Thursday, August 10, 2006 2:22 PM