Sharp UX-B800 User Manual
Page 50
PBX Operations
48
PBX Operations
If the machine is connected to a PBX,
you can use it to perform the following
operations:
Making enquiry calls: During a call,
you can put the original caller on hold,
make a further call to a third party, and
then go back to the original caller.
Transferring calls: You can transfer a
call to another number on the same
PBX without operator assistance.
Making enquiry calls
1
During the telephone conversation,
press
. This puts the original
caller on hold.
2
When you hear the dial tone, dial
the number of the third party for the
enquiry call.
3
When you have finished the enquiry
call, you will be automatically
returned to the original caller as
soon as the third party hangs up.
R
Transferring calls
1
During the telephone conversation,
press
. This puts the original
caller on hold.
2
When you hear the dial tone, dial
the number to which you want to
transfer the call. When the other
party answers, hang up, and the call
will be transferred.
•
If the other party does not answer,
press
again to return to the
original caller.
R
R
all.book Page 48 Thursday, August 10, 2006 2:22 PM