Sony MINIDISC - Manual (Page 21)

Label Film
A A D D C C D D
A U S T R I A
19
3.3. Label-, Artwork- and Print Films
For unmistakeable reference during produc-
tion the catalogue number must be indica-
ted on each film outside of the print area for
identification.
I. Label Film
Usually a graphic or picture will be used for the
front side. For clear identification of the final MD it
is necessary to include the catalogue number on the
label. The MD Logo shall not be inserted, as it al-
ready appears on the upper cartrigde.
During preparation of the label films please mind
the following:
• Send coated positive offset films with approx. 3
mm bleed only.The registration and cutting marks
must be located outside the bleed.
• The films must not reveal damage of any kind and
must be packed in such a way so as to prevent
folding or creasing (roll container or carton).
• In order to match label and artwork please en-
close compulsory proofs regarding colour with all
films.
• Please identify each film with colour specifcation.
Direction of Texture or Paper Grain
R = max. 0.7 mm for all 4 corners
63.8
54.7
All dimensions in mm with a tolerance of ± 0.2 mm
In order to ensure optimum reliability under a variety of different operating and storage conditions DADC uses special paper quality.
Upper Cartridge