Sony MINIDISC - Manual (Page 23)

Backline Card
A A D D C C D D
A U S T R I A
21
II. b) Artwork Films (Backline Card)
The backline card contains similar information as
CD backline cards (eg.: artist, disc title, catalogue
no.). The MiniDisc logo (recommended size 7mm)
has to be inserted on both spines of the backline
card, so that it can be easily read at top of the
spine end if the MD is stored upright in a rack
(see drawing below).
During preparation of the print films for the
backline card please mind the following:
• Send coated positive offset films with approx.
3 mm bleed only, the registration and cutting
marks must be located outside the bleed.
• The films must not reveal damage of any kind
and must be packed in such a way so as to
prevent folding or creasing (roll container or
carton).
• The catalogue number must appear on the
backline card.
• Please enclose compulsory proofs regarding
colour with all films.
• Please mark each film emulsion side with the
colour.
• Spine printing should be upright reading when
cover up.
Direction of Texture or Paper Grain
ARTIST AND TITLE
11.2 11.2 86.4
103.2
108.8
ARTIST
AND TITLE
ARTIST
AND TITLE
1
2 3
All dimensions in mm with a tolerance of ± 0.2 mm
DADC will provide artwork in following quality:
Wood-free art paper.
160-180g/m2 = 0,15 - 0,16 mm thick.
Coated on both sides.
MD Logo: , ... on this spine you can choose
between position or .
.......... on the backside placement and
position of a MD Logo is optional.
1 2
1 2
3