Spalding 211014 - Manual (Page 17)

17 03/05 P/N 211014
H-1
P-6
P-5
P-4
P-6
H-1
10.
SIDE OF WHEEL WITH
LONGER PLASTIC
AXLE NEEDS TO FACE
THE WHEEL BRACKET.
IMPORTANT!
Insert axle (P-5) through wheel bracket (P-4). Secure wheels (P-6) to axle using pushnuts (H-1).
Carefully tap pushnuts onto axle with hammer or mallet.
Secure both hinge tubes (P-16) to second wheel bracket (P-4) with carriage bolts (H-13)
and flange nuts (H-11).
P-4
H-11
P-16
9.
P-16
H-13
TO INSTALL SECOND
PUSHNUT:
• Assemble Pushnut,
Wheels, Axle, And Wheel
Bracket As Shown.
• Support Pushnut/Axle
From The End With A
Block Of Wood To Install
The Second Pushnut Onto
The Axle.
NOTE:
Wood Block