Spalding 211014 - Manual (Page 18)

18
P/N 211014 03/05
Position base as shown. Secure wheel bracket assembly with disc (P-23),
washer (H-9) and nut (H-26) as shown.
H-10
P-23
H-9
H-26
Carefully reposition
entire assembly as
shown:
11.
TWO PEOPLE REQUIRED
FOR THIS PROCEDURE.
FAILURE TO FOLLOW THIS
WARNING COULD RESULT IN
SERIOUS INJURY AND/OR
PROPERTY DAMAGE.
WARNING!
IMPORTANT!
DO NOT OVER
TIGHTEN
12.
Install pole mount bracket (P-9) and reinforcement bracket (P-7) with
carriage bolts (H-16) as shown. Tighten flange nuts (H-11) completely.
P-9
H-16
P-7
H-11
P-3