Spalding 211014 - Manual (Page 29)

29 03/05 P/N 211014
SECTION D: INSTALL FRONT COVER & HANDLE
1.
Attach front cover (P-22) to hinge tubes (P-16) using carriage bolts (H-27) and flange nuts (H-11) as
shown.
P-22
H-27
H-11
P-16
Upright system and fill base (P-8) with water (approximately 40 gallons) and snap fill cap (P-24) in place.
P-24
2.
DO NOT LEAVE
ASSEMBLY UNATTENDED
WHEN EMPTY; IT MAY TIP
OVER.
WARNING!
ADD TWO GALLONS (7.6
LITERS) OF NON-TOXIC
ANTIFREEZE IN SUB-
FREEZING CLIMATES.
CAUTION!
TWO PEOPLE REQUIRED
FOR THIS PROCEDURE.
FAILURE TO FOLLOW THIS
WARNING COULD RESULT
IN SERIOUS INJURY AND/OR
PROPERTY DAMAGE.
WARNING!
P-8
IF USING SAND:
2 GALLONS OF
ANTI-FREEZE IS
NOT REQUIRED
NOTE:
SAND SAND
(360 lb.) (360 lb.)
(163 kg) (163 kg)