Sony ZS-D7 User Manual

Page 37

Advertising
background image

The Timer

37

EN

The Timer

6

Set the timer to the hour and the minutes you want
to start recording.

1 Turn the jog dial

to set the hour and
press ENTER.

2 Turn the jog dial to set the minutes, and press

ENTER.

7

Set the timer to the hour and the minutes you want
to stop recording. (Do as step 6.)

8

Turn the jog dial to set the volume you want, and
press ENTER.

9

Press STANDBY.

The power goes off and the player enters the
standby mode. The

t indication and the recording

side of the tape (front side

( or reverse side 9)

appear in the display. To change the recording
side, press STANDBY again.

At the preset time, the power will go on and the
recording will start. Then the power will go off at
the preset time, and the player will enter the
standby mode again.

Tip

If you made a mistake,
press CANCEL. The
setting entered last will
be cleared. Re-enter it.

Tips
• To exit the standby

mode, press STANDBY
twice to make the

t

indication disappear.

• The preset settings

remain until you reset
them.

• When you select both

sides recording, the
recording will stop
after the both sides
recording finishes so
that accidental
recording will not be
made.

• The display window

does not light while the
recording timer is on.

continued

Advertising