Sony SAVA-D900 - Manual (Page 11)

11
Getting Started
Center speaker
R-ch SPEAKER
INPUT
R-ch
SPEAKER
OUTPUT
REAR SPEAKERS
L L
R
– +
R
TV
AUDIO
R
L
R
L
OUTPUT
INPUT
AUDIO
VIDEO
TV
Rear speaker
(right)
Rear speaker
(left)
– +
CENTER SPEAKER
INPUT
MONITOR OUT
VIDEO
S-VIDEO
R
L
AUDIO
VIDEO
TV
The arrow ç indicates signal flow.
STEP 1 Connecting the main units
To disconnect a cord, hold down the release tab and pull
out the connector. Never pull the cord itself.
STEP 2 Connecting the center speaker
Use the supplied 8-feet-2 1 / 2 inches (2.5 m) speaker cord
to connect the center speaker.
Insert the stripped wires into the speaker terminals.
Be sure to connect matching speaker terminals (e.g., use the gray
wire to connect + to +, and use the striped wire to connect – to –).
If the connections are reversed (+ to –), the sound will lack bass.
STEP 3 Connecting the rear speakers
Use the supplied 32-feet-9 3 / 4 inches (10 m) speaker cords
to connect the left and right rear speakers.
Insert the stripped wires into the speaker terminals.
STEP 4 Connecting your TV
Use the supplied audio connecting cord to connect the TV
AUDIO INPUT jacks on the left main unit to the AUDIO
OUTPUT jacks on your TV.
Important
If your TV set has an on/off switch for its internal speaker, set
this to off, and enjoy the sound of this speaker system. If your TV
set does not, set the volume on your TV set to minimum.
Use the supplied video connecting cord to connect the
MONITOR OUT jack on the left main unit to the VIDEO
INPUT jack on your TV.
If you use AUDIO OUT jacks marked VARIABLE
After making the connection as shown above, turn up the
volume on the TV set. Use this speaker system’s volume
control for regular volume adjustment. Turning down the
volume on the TV set reduces the AUDIO OUT signal
level and may cause a loss in sound quality.
If you have a Sony XBR 2 series TV or Sony
Projection TV equipped with a speaker switch
If your Sony XBR
2 series TV set or Projection TV is
compatible with SAVA series speakers, you can use the
TV set’s menu and remote control functions to operate
this speaker system.
For details, see the Operating Instructions supplied with
your TV set.
Be sure to connect the TV AUDIO INPUT jacks on the left
main unit to the TV set’s FIXED AUDIO OUTPUT jacks if
you make this connection.
Main unit (right) Main unit (left)
Main unit (left)
Main unit (left)
Continued to the next page
Main unit (left)