Sony SAVA-D900 - Manual (Page 29)

29
Playing Discs
Using the title menu
A DVD is divided into long sections of a picture or a
music piece called “titles.” When you play a DVD which
contains several titles, you can select the title you want
using the title menu.
1
Press TITLE on the remote.
The title menu appears on the TV screen. The contents
of the menu vary from disc to disc.
2
Press </M/m/, to select the title you want to
play.
Depending on the disc, you can use the number
buttons to select the title.
3
Press ENTER.
The system starts playing the selected title.
Notes
• Depending on the DVD, you may not be able to select the title.
• Depending on the DVD, a “title menu” may simply be called a
“menu” or “title” in the instructions supplied with the disc.
“Press ENTER.” may also be expressed as “Press SELECT.”
Using the Menu for Each
DVD
TITLE
</M/m/,
ENTER
DVD MENU
1 2 3
4 5 6
7 8 9
>10 10 0
Resuming Playback from
the Point Where You
Stopped the Disc (Resume
Play)
The system stores the point where you stopped the disc,
and when “RESUME” appears on the front panel display,
you can resume playback from that point.
As long as you do not open the disc tray, Resume Play is
available even if you turn the power off.
1
While playing a disc, press s to stop playback.
“RESUME” appears in the front panel display and
“When playing next time, disc restarts from point you
stopped. To start from beginning, press
STOP
again”
appears on the TV screen.
If “RESUME” does not appear, Resume Play is not
available.
2
Press H.
The system starts playback from the point where you
stopped the disc in Step 1.
z
To play from the beginning of the disc
When the playing time appears on the front panel display before
you start playing, press s again to reset the playing time, then
press H.
Notes
• Resume Play may not be available depending on the DVD.
• Resume Play is not available in Shuffle or Program Play mode.
• Depending on where you stopped the disc, the system may
resume playback from a different point.
• The point where you stopped playing is cleared when:
– you open or close the disc tray
– you disconnect the AC power cord
– you change the play mode
– you start playback after selecting a title, chapter or track
– you change the settings of “TV TYPE” in ”SCREEN SETUP”
in the setup display
– you change the settings of “PARENTAL CONTROL” in
”CUSTOM SETUP” in the setup display
x
N
s
H
1 2 3
4 5 6
7 8 9
>10 10 0
Continued to the next page