Sony SAVA-D900 User Manual

Page 18

Advertising
background image

18

Getting Started

Height diagram

Press

</,

to change between R.HEIGHT LOW and

R.HEIGHT HIGH.
• R.HEIGHT LOW

Select this if the rear speakers are located in the section
D

.

• R.HEIGHT HIGH

Select this if the rear speakers are located in the section
C

.

To specify the balance and level of the speakers

1

Press TEST TONE on the remote.
You will hear the test tone from each speaker in
sequence.

2

Press LEVEL.

3

Sit at your listening position and select the item to
be adjusted using the
M/m buttons.
• Items adjusted in << LEVEL >>

– Balance of the front and rear speakers
– Volume level of the center and rear speakers and

subwoofer

You will also find other <<LEVEL>> items (dts LFE,
and D.COMP.), that you do not have to adjust here yet.
They are to be used when you customize sound fields.
See page 25.

4

Adjust the volume level so that the volume of the
test tone from each speaker sounds the same using
the
</, buttons.
The adjusted value will appear on the front panel
display.

5

Repeat Steps 3 and 4 to adjust other parameters
within <<LEVEL>>.
If you do not operate the remote for a few seconds, the
value turns off and is stored in the system.

6

Press TEST TONE again to turn off the test tone.

Speaker Setup

60

30

D

C

D

C

x

BALANCE

You can vary the balance of each speaker as follows. The
default adjustments are in the parentheses.
• FRNT. L __|__ R (center) (front speakers)

Adjust the balance between the front left and right
speakers (6 dB (L) to 6 dB (R), 1 dB steps).

• REAR L __|__ R (center) (rear speakers)

Adjust the balance between the rear left and right
speakers (6 dB (L) to 6 dB (R), 1 dB steps).

x

LEVEL

You can vary the level of each speaker as follows. The
default adjustments are in the parentheses.
• C. LEVEL (0 dB) (center speaker level)

Adjust the level of the center speaker (–6 dB to +6 dB,
1 dB steps).

• R. LEVEL (0 dB) (rear speakers level)

Adjust the level of the rear speakers (–6 dB to +6 dB,
1 dB steps).

• S. W. LEVEL (0 dB) (subwoofer level)

Adjust the level of the subwoofer (–6 dB to +6 dB,
1 dB steps).

Note

When you select an item, the sound cuts off for a moment.

To adjust the volume of all the speakers at one
time
Use the MASTER VOLUME +/– buttons.

Advertising