Sony CDX-C7850 - Manual (Page 22)

22
Adding tracks to a program
1
Press (SHIFT), then press (4) (PLAY
MODE) for two seconds.
If you have labelled the disc, the bank edit
mode appears. Press (4) (PLAY MODE) to
display “P” above.
2
Press (2) (N) or (5) (n) to select the
track slot number where you want to
insert a track.
3
Push the SEEK/AMS control up or down
to select the track you want to insert.
4
Press (6) (ENTER) to enter the track.
The current track is inserted in that slot
number and the succeeding tracks shift
down.
To continue inserting tracks, repeat steps 2
through 4.
Note
When a 24 slots have been filled, “*Mem Full*”
appears in the display, and you cannot insert
more tracks.
5
When you finish inserting tracks, press
(4) (PLAY MODE) for two seconds.
6
Press (SHIFT).
Track slot number
Erasing an entire program
1
Press (SHIFT), then press (4) (PLAY
MODE) for two seconds.
If you have labelled the disc, the bank edit
mode appears. Press (4) (PLAY MODE) to
display “P” above.
2
Press (2) (N) repeatedly until “DEL”
appears.
3
Press (6) (ENTER) for two seconds.
The entire program is erased.
4
When you finish erasing programs, press
(4) (PLAY MODE) for two seconds.
5
Press (SHIFT).
RLAY MODE ENTER
DISC TRACK
RLAY MODE ENTER
RLAY MODE ENTER
RLAY MODE ENTER
DISC TRACK
RLAY MODE ENTER
DISC TRACK