Using the radio data system (rds), Models of area code cel, cek only), Receiving rds broadcasts – Sony STRDG910 User Manual

Page 69

Advertising
background image

69

GB

D:\CANNES\SONY_HA\JOB 2007\STR-
DG910\IM_910_CEL\Data_CEL\GB_data\GB05TUN_STR-DG910-CEL.fm

masterpage: Right

STR-DG910

3-094-430-31 (1)

T

u

ne
r Operations

5

Press

V/v repeatedly to select

“4-TUNER”.

6

Press

or

b to enter the

menu.

7

Press

V/v repeatedly to select

“NAME IN”.

8

Press

or

b to enter the

parameter.

The cursor flashes and you can select a
character. Follow the procedure given in
“To create an index name” below.

To create an index name

1

Use V/v/B/b to create an index name.

Press V/v to select a character, then press
B/b to move the cursor to the next position.

If you made a mistake

Press B/b until the character you want to

change flashes, then press V/v to select the

correct character.

Tips

• You can select the character type as follows by

pressing V/v.

Alphabet (upper case) t Numbers t

Symbols

• To enter a blank space, you can

– press V/v repeatedly until a blank space

appears in the display.

– press

b

without input a character.

2

Press

to enter the name.

The entered name is registered.

Note (Models of area code CEL, CEK
only)

When you name an RDS station and tune in that
station, the Program Service name appears instead
of the name you entered. (You cannot change the
Program Service name. The name you entered will
be overwritten by the Program Service name.)

Using the Radio Data
System (RDS)

(Models of area code CEL, CEK
only)

This receiver also allows you to use RDS
(Radio Data System), which enables radio
stations to send additional information along
with the regular program signal. You can
display RDS information.

Notes

• RDS is operable only for FM stations.
• Not all FM stations provide RDS service, nor do

they provide the same type of services. If you are
not familiar with the RDS services in your area,
check with your local radio stations for details.

Simply select a station on the FM
band using Direct Tuning (page 66),
Automatic Tuning (page 65), or
Preset Tuning (page 67).

When you tune in a station that provides RDS
services, “RDS” lights up and the program
service name appears on the display.

Note

RDS may not work properly if the station you tuned
to is not transmitting the RDS signal properly or if
the signal strength is weak.

Receiving RDS broadcasts

Advertising