Sony STRDG910 - Manual (Page 72)

72 GB
D:\CANNES\SONY_HA\JOB 2007\STR-
DG910\IM_910_CEL\Data_CEL\GB_data\GB06OTH_STR-DG910-CEL.fm masterpage: Left
STR-DG910
3-094-430-31 (1)
Listening to digital sound
from other inputs
(DIGITAL ASSIGN)
You can reassign digital audio input that has
OPTICAL or COAXIAL (VIDEO 1 IN,
VIDEO 2/BD IN, DVD IN, SAT IN, SA-CD/
CD/CD-R IN) signals to another input when
they are not currently being used.
For example, to output the sound source for
DVD player using the OPTICAL IN jack on
the receiver, then:
• Connect the optical output jack of the DVD
player to the OPTICAL VIDEO 2/BD IN
jack of the receiver.
• Assign “VD2 OPT” to “DVD” in the
DIGITAL ASSIGN setting.
1
Press RECEIVER.
The RECEIVER indicator lights up and
receiver operation is activated.
2
Press MENU.
“1-LEVEL” appears on the display.
3
Press V/v repeatedly to select
“5-AUDIO”.
4
Press or b to enter the
menu.
5
Press V/v repeatedly to select
“D. ASSIGN”.
6
Press or b to enter the
parameter.
7
Press V/v repeatedly to select
the digital audio input you want
to reassign (for example, “VD2
OPT”).
8
Press or b to enter your
selection.
9
Press V/v repeatedly to select
the input you want the digital
audio input selected in step 7 to
be reassigned to (for example,
“VD2–DVD”).
If an input is switched to “DVD”, the
sound of the DVD player will also
become a digital sound through the
OPTICAL VIDEO 2/BD IN jack.
The input you can reassign to varies for
each digital audio input. For details, see
“Assignable inputs for digital audio
input” (page 73).
To return to the previous display
Press B.