Star Micronics Dot Impact Printer - Manual (Page 13)

3-5 STAR Command Specifications
Rev. 0.70
ESC 6
[Name] Switch to IBM character set #2
[Code] ASCII ESC 6
Hexadecimal 1B 36
Decimal 27 54
[Defined Area] ---
[Initial Value] ---
[Function] Switches from IBM character set #1 to #2.
The subsequent <80> H to <9F> H codes are handled as character data.
When the character code table settings are for the IBM character set #1, this command is ignored.
This command is only effective in the standard mode.
ESC 7
[Name] Switch to IBM character set #1
[Code]
ASCII ESC 7
Hexadecimal 1B 37
Decimal 27 55
[Defined Area] ---
[Initial Value] ---
[Function] Switches from IBM character set #2 to #1.
The subsequent <80> H to <9F> H codes are handled as control codes.
When the character code table settings are for the IBM character set #2, this command is ignored.
This command is only effective in the standard mode.