Star Micronics Dot Impact Printer - Manual (Page 18)

3-10 STAR Command Specifications
Rev. 0.70
3-3-3 Print mode
ESC E
[Name] Select emphasized printing
[Code] ASCII ESC E
Hexadecimal 1B 45
Decimal 27 69
[Defined Area] ---
[Initial Value] Emphasized printing cancelled.
[Function] Specifies emphasized printing for subsequent data.
When in emphasized printing, data is printed in two passes.
This command is effective for both ANK characters and Kanji characters (prints with four passes for 2 pass
Kanji characters, and with 8 passes for 4 pass Kanji characters).
ESC F
[Name] Cancel emphasized printing
[Code]
ASCII ESC F
Hexadecimal 1B 46
Decimal 27 70
[Defined Area] ---
[Initial Value] Emphasized printing cancelled.
[Function] Cancels emphasized printing for subsequent data.