Star Micronics Dot Impact Printer - Manual (Page 26)

3-18 STAR Command Specifications
Rev. 0.70
ESC a n
[Name] Feed paper n lines
[Code] ASCII ESC a n
Hexadecimal 1B 61 n
Decimal 27 97 n
[Defined Area] 1 ≤ n ≤ 127
[Initial Value] ---
[Function] After printing data in the line buffer, paper is fed according to (currently set line feed amount x n).
This paper feed amount is unaffected even if there are vertical expanded characters and double high and
wide expanded characters in one line.
ESC 0
[Name] Set line feed to 1/8 inch
[Code] ASCII ESC 0
Hexadecimal 1B 30
Decimal 27 48
[Defined Area] ---
[Initial Value] 1/6 inch
[Function] Sets subsequent line feed amounts to 1/8 inch.
ESC 1
[Name] Set line feed to 7/72 inch
[Code] ASCII ESC 1
Hexadecimal 1B 31
Decimal 27 49
[Defined Area] ---
[Initial Value] 1/6 inch
[Function] Sets subsequent line feed amounts to 7/72 inch.