Star Micronics Dot Impact Printer - Manual (Page 16)

3-8 STAR Command Specifications
Rev. 0.70
3-3-2 Character Expansion Settings
SO
[Name] Specify double-wide expanded characters
[Code]
ASCII SO
Hexadecimal 0E
Decimal 14
[Defined Area] ---
[Initial Value] Cancel double-wide expanded characters
[Function] Prints ANK characters and Kanji characters with characters expanded twice the normal width.
This command is equivalent to ESC W n (n = 1).
DC4
[Name] Cancel double wide printing
[Code]
ASCII DC4
Hexadecimal 14
Decimal 20
[Defined Area] ---
[Initial Value] Cancel double-wide expanded characters
[Function] Cancels horizontal double-wide printing if the following commands specify horizontal double-wide printing.
• Double horizontal double-wide printing specifying command (SO)
• Specify/cancel the horizontal double-wide printing (ESC W)
This command is equivalent to ESC W n (n = 0).