Sharp MD-MT821 User Manual
Page 7
This unit can be
used with 4 different power sources: a rechargeable battery, an AC
adaptor, a battery case, and a separately available car adaptor (AD-CA20X).
2
Mark
To the DC IN 5V jack
Insert securely, all the
way In.
AC 12OV, 60 Hz
To an AC outlet
Notes:
After charging has been completed, the
AC adaptor may be left connected.
(For example, when charging at night)
If the rechargeable battery is in the unit,
it will be charged, even while operating
the unit. (Float charge)
n
Rechargeable battery power
When the rechargeable battery
IS
used for
the first time or when you want to use it af-
ter a long period of non use, be sure to
charge it fully.
1
2
3
4
Open the rechargeable battery compart-
ment cover.
Insert the rechargeable battery.
Insert the side with the arrow first.
Close the rechargeable battery compart-
ment cover.
Plug the AC adaptor into the AC outlet,
and then insert the plug on the AC adap-
tor cord into the DC IN 5V jack.
About 4 seconds later, "
" will
flash, and the battery will begin charg-
ing.
l Battery charging will be complete in
3.0 hours. When the charging
IS
com-
plete, "
" w i l l go out.
Do not force open the rechargeable bat-
tery cover too far.
When the AC adaptor plug is inserted
and a MiniDisc has already been in-
serted, playback may start automatically.
In this case, press the
n / :OFF button
twice to turn the power off.
6