Sony RM-VL600T - Manual (Page 10)

10
Setting a Component Code by
the Search Function
You can find a code number available for a
component that does not have one in the supplied
“Component code numbers.”
Before starting the Search function
Set each component to the following status so that
the Search function works effectively.
TV, AMP: Power-on
CD player, MD player*, cassette deck: Power-on
with a playback source (disc, cassette tape, etc.)
Other components: Power-off
* If any of these components are assigned to any of
the Component Select buttons (page 24), you can
set a component code using the Search function.
SET
SAT DVD TV CBL
TAPE CD VCR
1
VIDEO1
2
VIDEO2
3
AUX
4
TUNER
5
CD
6
TAPE
7
MD
8
TV
9
PHONO
0
DVD
GUIDE MENU
AMP
ENT
1
-/--
ANALOG
DIGITAL
PROGRAM
1 2
1
2
4
3
3
1
1
Press and while holding SET, press MENU.
SET
MENU
+
The SET indicator lights up.
SET
2 Press the Component Select button for the
desired component.
TV
The SET indicator and the selected Component
Select button light up.
SET
SAT DVD TV CBL
TAPE CD VCR AMP
3
Press PROGRAM + or PROGRAM –, and
then 1 in turn until the component reacts
as described in the following.
TV, AMP: Powers off
VCR, CBL, SAT, DVD: Powers on
CD player, MD player, cassette deck: Plays back
PROGRAM
1
Press PROGRAM + to go to the next code
number.
Press PROGRAM – to go back to the previous
code number.
The Component Select button flashes three times
after the numbers have turned one cycle.
One cycle means, for example, the four-digit
code numbers beginning from “8” are cycled
through.
4
Press ENT.
ENT
The SET indicator and the Component button
turn off.
TV TV
If the Component Select button flashes five
times before turning off, it means that the setup
is incomplete. Start over from Step 1.