Sony RM-VL600T - Manual (Page 23)

23
Programming a Series of
Commands on the Component
Select Buttons
As with the SYSTEM CONTROL buttons, you can
also programme a series of operating commands for
the Component Select buttons (up to 16 steps).
To execute the commands programmed on a
Component Select button by the System Control
function, press the button for more than 2 seconds.
SET
SAT DVD TV CBL
TAPE CD VCR
1
VIDEO1
2
VIDEO2
3
AUX
4
TUNER
5
CD
6
TAPE
7
MD
8
TV
9
PHONO
0
DVD
GUIDE MENU
TOOLS
AMP
ENT
OK
1
-/--
RETURN
ANALOG
DIGITAL
PROGRAM
1 2
1,3
2
Notes
• When you press the button for less than 2 seconds, it
works as a normal Component Select button, and the
programmed function does not work.
• See also “Tips for programming the System Control
functions” on page 22.
Example: To programme the procedure on page
21 for the VCR Component Select button
1
Press and while holding SET, press the
VCR Component Select button.
The SET indicator and the VCR Component
Select button lights turn on.
SET
SAT DVD TV CBL
TAPE CD VCR AMP
If a Control Programme function (Component
Macro) has already been set on the button, the
button flashes twice. The setting procedure is
automatically cancelled.
2 Set the Control Programme function.
With this example, press the buttons in sequence
as below:
TV
1
VCR
VCR
AMP
VIDEO1
TV
1
1 1
You can programme up to 16 consecutive steps
on each of the Component Select buttons,
including the first step of pressing to select a
Component Select button.
3 Press SET to complete the programming.
The VCR Component Select button light turns
off.
Continued