Sanyo DVW-7100a - Manual (Page 10)

– 10 – EN
Setup
Need help? Call
1-800-813-3435
Hint Hint
• To go back one step, press the s button
(during the steps [2] to [7]).
• Your clock setting will be lost if either there
is a power failure or this unit has been
unplugged for more than 30 seconds.
Hint Hint
• If you accidentally select Spanish or
French and need English: Press the
MENU button and choose SELEC.
IDIOMA, or SELECTION LANGUE. Press
the B button, and select ENGLISH. Finally,
press the CLEAR/C.RESET button.
To Preset the Channel Again
1) Press the MENU button until the main
menu appears.
2) Select "CHANNEL SET UP" by pressing
the K or L button. Then, press the B but-
ton.
3) Select "AUTO SET UP" by pressing the
K or L button. Then, press the B button.
After scanning, the tuner stops on the low-
est memorized channel.
To Change the On-Screen Language
1) Press the MENU button until the main
menu appears.
2) Select "LANGUAGE SELECT" by press-
ing the K or L button. Then, press the B
button.
3) Select "ENGLISH" , "FRANCAIS" or
"ESPAÑOL" by pressing the K or L but-
ton. Then, press the CLEAR/C.RESET
button.
Clock Set Up
To Select a Channel
You can select a channel by directly
entering channel using the Number but-
tons on the remote control.
Notes for using the Number buttons:
• When selecting cable channels which
are higher than 99, enter channel
numbers as a three-digit number.(For
example: 117, press 1,1,7)
• You must precede single-digit channel
numbers with a zero (For example:
02, 03, 04 and so on).
5 5
4 4
CLOCK SET
MONTH DAY YEAR
1 0 / 0 1 2 0 0 4
HOUR MINUTE AM/PM
– – : – – – –
CLOCK SET
MONTH DAY YEAR
1 0 / 0 1 FRI 2 0 0 4
HOUR MINUTE AM/PM
0 5 : – – – –
6 6
CLOCK SET
MONTH DAY YEAR
1 0 / 0 1 FRI 2 0 0 4
HOUR MINUTE AM/PM
0 5 : 4 0 – –
7 7
CLOCK SET
MONTH DAY YEAR
1 0 / 0 1 FRI 2 0 0 4
HOUR MINUTE AM/PM
0 5 : 4 0 P M AM
B PM
Select the current year.
Select “AM” or “PM”.
8 8 To exit the CLOCK SET
screen
Select the current hour.
Select the current minute.
1 1
- M E N U -
TIMER PROGRAMMING
AUTO REPEAT [OFF]
CHANNEL SET UP
B CLOCK SET
LANGUAGE SELECT
MENU
2 2
CLOCK SET
MONTH DAY YEAR
1 0 / – – – – – –
HOUR MINUTE AM/PM
– – : – – – –
CLOCK SET
MONTH DAY YEAR
1 0 / 0 1 – – – –
HOUR MINUTE AM/PM
– – : – – – –
Select the current month.
Select the current day.
• If the clock is not set, the
CLOCK SET screen
appears when you press
the MENU button. In this
case, go to step [2].
VCR VCR VCR
3 3
VCR
Press the VCR button first.
1 1
- M E N U -
TIMER PROGRAMMING
AUTO REPEAT [OFF]
B CHANNEL SET UP
CLOCK SET
LANGUAGE SELECT
2 2
CHANNEL SET UP
AUTO SET UP
B MANUAL SET UP
3 3
MANUAL SET UP
CHANNEL 30 (CATV)
ADD
4 4
MANUAL SET UP
CHANNEL 30 (CATV)
DELETE
Select “ADD” or “DELETE”.
Select the channel to be
added or deleted.
5 5 To exit the
menu
To Add/Delete Channels
MENU
CLEAR
C.RESET
or
or
or
or
or
or
or
or
or
or
• If the clock is not set, the
CLOCK SET screen
appears when you press
the MENU button. In this
case, press the MENU
button again.
or
H9680UD_EN/SP.qx3 04.8.10 4:26 PM Page 10