Sanyo DVW-7100a - Manual (Page 7)

If your TV is compatible with 525p (480p) progressive scanning and you want to
enjoy that high quality picture;
You must select the connection Method 3 above and progressive scanning mode. To set the mode,
press and hold the PLAY button on the front panel for more than 5 seconds, so that PROGRESSIVE
indicator will light up. (The progressive scanning is not available in the VCR mode.)
If your TV is not compatible with progressive scanning;
Use this unit in interlace mode. Make sure that PROGRESSIVE indicator of this unit lights off. If not,
press and hold the PLAY button on this unit for more than 5 seconds, so that PROGRESSIVE indi-
cator will light off.
DIGITAL AUDIO OUT
COAXIAL ANT-OUT
ANT-IN
ANT-OUT
ANT-IN
AUDIO OUT
DVD VCR DVD/VCR
S-VIDEO OUT COMPONENT VIDEO OUT
AUDIO IN
VIDEO IN
AUDIO OUT
VIDEO OUT
L
L Y
R
R
C B / P B
C R / P R
DIGITAL
AUDIO OUT
COAXIAL
AUDIO
OUT
DVD DVD/VCR VCR
S-VIDEO
OUT
COMPONENT VIDEO OUT AUDIO OUT
VIDEO OUT
AUDIO IN
VIDEO IN
L
L
R
R
Y
C B /
P B
C R /
P R
– 7 – EN
Setup
AUDIO IN jack
Connect audio cable coming
from the audio out jack of a
camcorder, another VCR, or an
audio source here.
DVD AUDIO OUT (analog)
jacks
Connect the supplied audio
cables here through the Audio
In jacks of a television or other
audio equipment. (DVD only) DVD/VCR AUDIO OUT jacks
Connect the supplied audio
cables here through the audio
In jacks of a television or other
audio equipment.
ANT-IN jack
Connect your antenna
or cable box here.
ANT-OUT jack
Connect the
supplied RF
cable to the
antenna input
jack on your TV.
DVD/VCR VIDEO OUT jack
Connect the supplied yellow
video cable here through
the TV’s video in jack.
DIGITAL AUDIO OUT
COAXIAL jack
Connect an optional coaxial
digital audio cable here
through the coaxial digital
audio in jack of a decoder or
audio receiver. (DVD only)
VIDEO IN jack
Connect a cable com-
ing from the video out
jack of a camcorder,
another VCR, or an
audio-visual source
(laser disc player, video
disc player, etc.) here.
S-VIDEO OUT jack
Connect an optional
S-Video cable here
through the S-video
in jack of a televi-
sion. (DVD only)
Front & Rear Terminals
DIGITAL AUDIO OUT
COAXIAL ANT-OUT
ANT-IN AUDIO OUT
DVD VCR DVD/VCR S-VIDEO OUT COMPONENT VIDEO OUT
AUDIO IN
VIDEO IN
AUDIO OUT
VIDEO OUT
L
L
R
R
AUDIO IN
R L
VCR DVD/VCR
AUDIO OUT
L
R
DIGITAL
AUDIO OUT
AUDIO
OUT
DVD
S-VIDEO
OUT
COMPONEN
VIDEO OUT
L
R
C
C
or
Y
CB/ PB
CR/ PR
VIDEO IN
VCR DVD/VCR
AUDIO OUT
VIDEO OUT
S-VIDEO IN
DIGITAL
AUDIO OUT
COAXIAL
AUDIO
OUT
DVD
S-VIDEO
OUT
COMPONENT
VIDEO OUT
DIGITAL
AUDIO OUT
Y
C B /
P B
C R /
P R
Y
C B /
P B
C R /
P R
COMPONENT
VIDEO IN
COAXIAL
AUDIO
OUT
DVD
S-VIDEO
OUT
COMPONENT
VIDEO OUT
(Analog) AUDIO OUT
VIDEO OUT
TV
Method 1
Good picture Basic Audio
Method 2 Method 3
Better picture Best picture
S-VIDEO OUT
COMPONENT VIDEO OUT
Video
cable
(supplied)
Audio cable
(supplied)
S-Video
cable
(commercially
available)
Component
Video cables
(commercially
available)
Note
• Connect this unit directly to the TV. If the A/V cables are connected to a VCR, pictures may be distorted due to the copy protection system.
DVD+VCR
Connection to a TV
POWER
VIDEO VIDEO AUDIO AUDIO
AV INP V INPUT REW REW F.FWD STOP STOP/E EJECT PLAY
REC TIMER REC
REC/OTR CHANNEL
OPEN/CLOSE
VCR DVD PROGRESSIVE
OUTPUT SKIP/REV STOP PLAY FWD/SKIP
[Back of DVD+VCR]
[Front of
DVD+VCR]
POWER
VIDEO AUDIO
AV INPUT REW F.FWD STOP/EJECT PLAY
REC TIMER REC
REC/OTR CHANNEL
OPEN/CLOSE
VCR VD DVD PROGRESSIVE PROGRESSIVE
OUTPUT SKIP SKIP/REV REV STOP STOP PLA PLAY FWD WD/SKIP SKIP
more than 5 seconds
[Interlace mode]
[Progressive scanning mode]
[DVD+VCR]
• When progressive scanning mode is selected, no video signal will be output from the VIDEO OUT or S-VIDEO OUT jack.
• The COAXIAL, DVD AUDIO OUT, S-VIDEO OUT and COMPONENT VIDEO OUT jacks are only useful in DVD mode.
COMPONENT VIDEO OUT
jacks
Connect optional component
video cables here through
the component video in jacks
of a television. (DVD only)
H9680UD_EN/SP.qx3 04.8.10 4:26 PM Page 7