Sony LMD-1420MD - Manual (Page 10)

Installing to the Rack
10
VIDEO IN/OUT (BNC)
These are the input/output connectors for a
composite video signal. Connect them to the
composite video input/output connectors on
equipment such as a VCR, video camera, or another
monitor.
AUDIO IN/OUT (RCA pin)
These are the input/output jacks for an audio signal.
Connect them to the audio input/output jacks on
equipment such as a VCR.
g LINE A connectors
Line input connectors for Y/C separate, composite video
and audio signals and their loop-through output
connectors.
Press the LINE A button on the front panel to monitor
the input signal through these connectors.
If you input signals to both Y/C IN and VIDEO IN, the
signal input to the Y/C IN is selected.
Y/C IN/OUT (4-pin mini-DIN)
These are the input/output connectors for a Y/C
separate signal. Connect them to the Y/C separate
input/output connectors on equipment such as a
VCR, video camera, or another monitor.
VIDEO IN/OUT (BNC)
These are the input/output connectors for a
composite video signal. Connect them to the
composite video input/output connectors on
equipment such as a VCR, video camera, or another
monitor.
AUDIO IN/OUT (RCA pin)
These are the input/output jacks for an audio signal.
Connect them to the audio input/output jacks on
equipment such as a VCR.
h /I (Equipotential/Function Earth) terminal
(equipotential) terminal
Connects the equipotential plug.
I (function earth) terminal
Connects the earth cable.
i AC IN socket
Connect the supplied AC power cord.
Installing to the Rack
1
Remove the screws (4) to remove the stand.
2
Attach the unit to the rack after attaching the
mounting bracket.
LINE A
LINE B
PARALLEL REMOTE RGB/COMPONENT
VIDEO IN OUT VIDEO IN OUT
G/Y IN OUT
B/P B IN OUT EXT SYNC IN OUT
R/P R IN OUT AUDIO IN OUT AUDIO IN OUT AUDIO IN OUT
AC IN
OPTION
AUDIO IN
OPTION IN
IN OUT
LINE A LINE B
SDI
SCAN ASPEC T
RESET MENU
VOLUM E
POWE R ENTER
RGB/ COMPO NENT EXT SYNC BLUE ONLY