Sony LMD-1420MD - Manual (Page 16)

Adjustment Using the Menus
16
KEY INHIBIT
KEY INHIBIT
Adjusting and Changing the
Settings
STATUS menu
The STATUS menu is used to display the current status
of the unit. The following items are displayed:
• Signal format
• Color temperature
• Gamma
• Component level
• NTSC setup
• RGB/COMP SEL
• Scan mode
• Display
• Option
COLOR TEMP/BAL menu
The COLOR TEMP/BAL menu is used for adjusting the
picture white balance.
You need to use the measurement instrument to adjust
the white balance.
Recommended: Konicaminolta color analyzer CA-210
USER CONTROL menu
The USER CONTROL menu is used for adjusting the
picture.
Items that cannot be adjusted depending on the input
signal are displayed in blue.
F O R M AT xxxxx
xxxxxxxx
C O L O R T E M P xxxx
G A M M A x
C O M P L E V E L xxxxx
N T S C S E T U P xx
R G B / C O M P S E L xxxx
S C A N M O D E xxxx
S TAT U S ( 1 / 2 ) R r
D I S P L A Y
L M D - 1 4 2 0 M D
xxxxxxx
O P T I O N
B K M - 3 2 0 D
S T A T U S ( 2 / 2 ) R r
xC O L O R T E M P xxxx
M A N U A L A D J
· A D J U S T G A I N · · ·
· A D J U S T B I A S · · ·
· C O P Y F R O M
xxx
C O L O R T E M P / B A L
Submenu Setting
COLOR TEMP Select the color temperature from
among HIGH, LOW, LOW2 and
USER setting.
• HIGH (D93 or equivalent)
• LOW (D65 or equivalent)
• LOW2 (D56 or equivalent)
• USER
MANUAL ADJ If you set the COLOR TEMP to
USER setting, the item displayed is
changed from blue to white, which
means you can adjust the color
temperature.
• ADJUST GAIN...: Adjusts the
color balance (GAIN).
• ADJUST BIAS...: Adjusts the
color balance (BIAS).
• COPY FROM: If you select
HIGH, LOW or LOW2, the
white balance data for the
selected color temperature
will be copied in the user
setting.
Submenu Setting
CONTROL You can adjust the picture.
• CONTRAST: Adjusts the picture
contrast.
• BRIGHT: Adjusts the picture
brightness.
• CHROMA: Adjusts color intensity.
The higher the setting, the greater
the intensity. The lower the setting,
the lower the intensity.
• PHASE: Adjusts color tones. The
higher the setting, the more
greenish the picture. The lower the
setting, the more purplish the
picture.
• APERTURE: Adjusts the picture
sharpness. The higher the setting,
the sharper the picture.
For details of input signals and adjustable/
setting items, see page 8.
C O N T R O L
xC O N T R A S T
x
· B R I G H T x
· C H R O M A x
· P H A S E x
· A P E R T U R E xxx
U S E R C O N T R O L