Sony CDP-M555ES - Manual (Page 23)

Playing CDs
23
Playing CDs
5
First press >10 then press the number button of the
track.
When you select the track number less than 10,
press 10/0 first, and then press the corresponding
number to enter a track number from 1 to 9.
6
To program other discs/tracks, do the following:
To program
All tracks of another disc(s)
Other tracks on the same disc
Other tracks on other discs
7
Press ENTER or H to start Program Play.
To cancel Program Play
Press CONTINUE.
z You can check or change the program by pressing the
CHECK or CLEAR button on the remote Z
See page 22.
Creating a program while observing the
remote’s display Z
You can create up to eight programs in the remote’s
memory by using the remote’s display. Each program
can contain up to 32 steps.
1
Press MENU.
2
Move the cursor (B) to “Program input” by using
the Easy scroll key, then press the Easy scroll key.
Repeat Step(s)
2 to 4
5
2 to 5
The track
being programmed
S DISC ALL
NEXT
CD TEXT
1
CD2
GROUP
NO DELAY MULTI
2 3 X-FADE DELETE
CD3
REPEAT SHUFFLE 1
SEC STEP MIN ART. GROUP TRACK HIT ART. 2nd DISC
* D I S C - 2 * * 0 * * *
CD1
PROGRAM 1
Playing order
The disc being
programmed
N ame s e a r c h
P r o g r am p l a y
P r o g r am i n p u t
A r t i s s e l e c t t
CD1
: A P r o g r am A
B : P r o g r am B
C : P r o g r am C
D : P r o g r am D
CD1
3
Move the cursor to the program you want to
create, then press the Easy scroll key.
4
Press the Easy scroll key.
5
Select the desired disc by pushing the Easy scroll
key up or down.
To program a whole disc, press the Easy scroll key
again.
To program a certain track of the disc, select the
desired track by pushing the Easy scroll key up or
down, then press the Easy scroll key.
6 Repeat steps 4 and 5 to program more tracks or
discs.
To finish creating the program, press MENU. To play
the program, see “Playing the program you create
using the remote’s display” on page 25.
To erase a track or disc, move the cursor to the step
you want to erase in step 3, then press CLEAR.
To change a disc or track you programmed, move the
cursor to the step you want to change in step 3, then
press the Easy scroll key. Select the new disc or track
following steps 4 and 5.
Notes
• You cannot program the second player’s discs and tracks by
using the remote.
• The programmed disc and track numbers that are not
found in the player or on the disc are deleted from the
program, and the rest of the program is played in the
programmed order.
[ P r o g r am A ]
1 :
2 :
3 :
CD1
[ P r o g r am A ]
S t e p 1
D i s c 5 6 TRK - A L L
* D I SC - 5 6 *
CD1
[ P r o g r am A ]
S t e p 1
D i s c 5 6 TRK - 5
* D I SC - 5 6 *
CD1