Sony CDP-M555ES - Manual (Page 33)

33
Storing Information About CDs (Custom Files) Storing Information About CDs (Custom Files)
Grouping Discs (Group File)
You might find that too many discs make it hard to
find the disc you want. This player has a feature that
lets you classify discs into eight groups. Each disc can
be put into only one group.
Once you classify discs, you can enjoy Continuous,
Shuffle, or Repeat Play within a certain group (Group
Play).
Assigning discs to groups
1
Press CONTINUE or SHUFFLE before you start
playing.
2
Turn the JOG dial to select the disc you want to
assign to a group.
3
Press GROUP FILE.
“Select G1-G8” appears in the display.
4
Press one of the GROUP1-8 buttons to which you
want to assign the disc.
“GROUP FILE” and the group number appear in
the display and the disc is assigned to that group.
Deleting discs from a group
• To delete a disc from a group
1 Turn the JOG dial until the disc number you
want to delete from the group appears in the
display.
2 Press GROUP FILE.
“Select G1-G8” appears in the display.
3 Press CLEAR.
“GROUP ERASE” appears in the display.
• To delete all discs from a group, press CLEAR while
holding down whichever GROUP1-8 button you
want to clear.
CONTINUE SHUFFLE CLEAR CHECK JOG MENU/NO
GROUP1-8 GROUP FILE H . AMS >
Labeling groups (Group Name)
You can label the preset group number anything you
like, such as a category, using up to 13 characters.
Note that you cannot store the Group Name if you
have not assigned any disc to the group.
1
Press MENU/NO.
“NAME IN ?” flashes.
2
Turn the JOG dial until the group number you
want to label appears in the display, and then push
the JOG dial.
The flashing cursor ( ) appears.
3 Turn the JOG dial until the desired character
appears in the display.
The cursor disappears and the first space for the
Group Name flashes.
As you turn the JOG dial clockwise, the characters
appear in the following order. Turn the JOG dial
counterclockwise to go in reverse order.
(space) A B C D E F G H I J K L M N O P Q R S T U
V W X Y Z a b c d e f g h i j k l m n o p q r s t u v w
x y z 0 1 2 3 4 5 6 7 8 9 ! " # $ % & ' ( ) * + , – . / : ; <
= > ? @ _
4
Push the JOG dial to select the character.
The selected character lights up, and the flashing
cursor appears at the next space to be input.
To make a correction
Press CLEAR and begin again by inputting the correct
characters.
5
Repeat steps 3 and 4 to input more characters.
See also “Labeling discs on the player” on page 27
for details.
6
Press YES to store the Group Name.
I / 1