Sony VGN-FS600 Series - Manual (Page 106)

106
n N
Using Peripheral Devices
To connect a TV to the port replicator
1 Attach the port replicator to your computer.
2 Plug one end of an audio/video cable (1) into the Composite Audio Out jacks and the Composite Video Out Jack (2) on the
port replicator and the other into the Composite Audio and Video jacks on your TV.
If your TV has s-video input, you can have better visual quality by outputting image to s-video rather than composite video. In
such a case, please plug one end of the S-Video cable (3) into the S Video Out jack (4) on the port replicator and the other
end into the S Video jack on the TV. You will still need to connect Composite Audio Out jacks in order to hear sound through
TV speakers.
3 Switch the input channel of the TV to external input.
4 Set up the TV configuration system.