Sony VGN-FS600 Series - Manual (Page 86)

86
n N
Using Peripheral Devices
To connect in STB mode (Option 2)
1 Connect one end of the TV coaxial cable (1) (supplied) to your cable service access (wall outlet) (2). Connect the other end
to the VHF/UHF IN jack on the back panel of your set-top box (STB) (3).
2 Connect a second TV coaxial cable (4) (optional) to the VHF/UHF OUT jack on your STB unit (3). Connect the other end to
the VHF/UHF port (5) on the rear of your TV monitor or display.
3 Connect one end of a stereo A/V dubbing cable with triple RCA jacks (6) (optional), to the Composite Audio Out (L/R) jacks
(7) and the Video Out jack (8) on the back panel of your STB unit (3), matching the plug and jack colors.
4 Connect the other RCA jacks of the stereo A/V dubbing cable (6) into the Composite Audio In (L/R) jacks (9) and the
Composite Video In jack (10) on the A/V port replicator, matching the plug and jack colors.