Sony VGN-FS600 Series - Manual (Page 123)

123
n N
Using Peripheral Devices
Connecting to a Network (LAN)
You can connect your computer to 1000BASE-T/100BASE-TX/10BASE-T-type networks
*
via an Ethernet network cable.
Connect one end of an optional network cable to the Network (Ethernet) port on the bottom panel of your computer and the other
end to your network. For detailed settings and devices needed to connect to the network, see your Network Administrator.
* Depending on the model you purchased. See the online Specifications sheet to see whether your model supports a 1000BASE-TX connection.
✍
Your computer can be connected to the network with the default settings.
If the main unit is docked, you can only use the Network (Ethernet) port on the port replicator.