Setup, Setting up the projector, Video setup – Sharp PG-D40W3D User Manual
Page 22: Standard setup (front projection), Ceiling-mount setup, Example of standard setup
18
Setting up the Projector
Video Setup
If using this projector outside the U.S.A., please change setting to “0 IRE” in Video Setup. (See
page
Setting up the Projector
For optimal image quality, position the projector perpendicular to the screen with the projector's
feet fl at and level. Doing so will eliminate the need for Keystone correction and provide the best
image quality. (See page
Standard Setup (Front Projection)
Place the projector at the required distance from the screen
according to the desired picture size. (See page
Example of standard setup
Side View
Screen
Lens center
H
L
■
Refer to page
for additional information concerning “Screen Size and Projection Distance”.
•
Note
Ceiling-mount Setup
It is recommended that you use the
optional Sharp ceiling-mount adaptor and
unit for this installation. Before mounting
the projector, contact your nearest Sharp
Authorized Projector Dealer or Service
Center to obtain the recommended ceiling-
mount adaptor and unit (sold separately).
■