Sharp PG-D40W3D - Manual (Page 41)

37
Useful
Featur
es
“Network” menu
SEL./ADJ. ENTER END
Pict. SCR PRJ Network Help
Password Disable
DHCP Client Off
TCP/IP
MAC Address
Projector
X X : X X : X X : X X : X X : X X
X X - X X X X
“Help” menu
SEL ENTER END
There is no picture or audio
Vertical stripes or flickering image appear
Data image is not centered
Color is faded or poor
Picture is dark
The image is distorted
It is difficult to hear audio
Set up HDMI CEC function
Reset all adjustments to default settings
SEL.
Pict. SCR PRJ Net. Help
Main menu
Network
Page 49
Password [Enable/Disable]
DHCP Client [On/Off]
TCP/IP
MAC Address
Projector
Page 49
Page 50
Page 50
Page 50
Page 50
Main menu
Network
Page 49
Password [Enable/Disable]
DHCP Client [On/Off]
TCP/IP
MAC Address
Projector
Page 49
Page 50
Page 50
Page 50
Page 50
The items you can set with the
“Help” menu
“Help” menu n Page 51
Vertical stripes or fl ickering image appear
Auto Sync/Clock/Phase
Data image is not centered
Auto Sync/H-Pos/V-Pos/Resolution
Color is faded or poor
COMPUTER1/2 input
Signal type: Auto/RGB/Component
S-VIDEO or VIDEO input
Video System: Auto/PAL/SECAM/
NTSC3.58/NTSC4.43/
PAL-M/PAL-N/PAL-60
HDMI input
Dynamic range: Auto/Standard/Enhanced
* The selectable items vary depending on the input
signal and the selected input mode.
It is diffi cult to hear audio
Balance/Treble/Bass
Set up HDMI CEC function
One Touch Play
On : This enables One Touch Play.
Off : This disables One Touch Play.
System Standby
On : This enables System Standby.
Off : This disables System Standby.
* When enabling One Touch Play/System Standby,
be sure to enable the CEC setting on the HDMI-
compliant Sharp Video Products connected to
the projector.
•
•
•
•
•