Auto sync (auto sync adjustment), Auto power off function, Auto restart function – Sharp PG-D40W3D User Manual
Page 49: Standby mode, Setting the confirmation sound (system sound), Adjusting the projector function, Prj - adj” menu), System sound), 1 auto sync (auto sync adjustment), 2 auto power off function
45
Useful
Featur
es
Adjusting the Projector Function (“PRJ - ADJ” Menu)
SEL./ADJ.
ENTER
END
Auto Power Off
System Sound
System Lock
h
On
On
Auto Restart
On
STANDBY Mode
Standard
0
min
0
Lamp Timer(Life)
100%
Speaker
On
Audio Out
VAO
Audio Input
Audio 1
RS-232C
9600bps
Fan Mode
Normal
Disable
Auto Sync
On
Pict.
SCR
PRJ-ADJ
Net.
Help
1
2
3
4
5
7
6
8
9
0
1 Auto Sync (Auto Sync
Adjustment)
Selectable
items
Description
On
Auto Sync adjustment will occur when
the projector is turned on or when the
input signals are switched, when
connected to a computer.
Off
Auto Sync adjustment is not
automatically performed.
Auto Sync adjustment is also performed by
pressing AUTO SYNC.
The Auto Sync adjustment may take some
time to complete, depending on the image of
the computer connected to the projector.
When the optimum image cannot be achieved
with Auto Sync adjustment, use manual
adjustments. (See page
•
•
•
Note
2 Auto Power Off Function
Selectable
items
Description
On
When no input signal is detected for
more than 15 minutes, the projector will
automatically enter standby mode.
Off
The Auto Power Off function will be
disabled.
When the Auto Power Off function is set to
“On”, 5 minutes before the projector enters
standby mode, the message “Enter STANDBY
mode in X min.” will appear on the screen to
indicate the remaining minutes.
•
Note
3 Auto Restart Function
Selectable
items
Description
On
If the power cord is unplugged from the
outlet or the breaker switch is turned off
when the projector is on, then the
projector automatically turns on when
the power cord is plugged into the AC
outlet or the breaker switch is turned on.
Off
The projector does not turn on
automatically when the power cord is
plugged into the AC outlet or the
breaker switch is turned on.
4 STANDBY Mode
When set to “Eco”, power consumption is
reduced in standby mode.
Selectable
items
Description
Eco
The monitor output and Network
functions are switched off in standby
mode.
Standard
The monitor output and Network
functions are activated even if the
projector is in standby mode.
5 Setting the Confi rmation
Sound
(System
Sound)
Selectable
items
Description
On
A confi rmation sound is made when
the projector turns on/off.
Off
No confi rmation sound is made.