Sharp PG-D40W3D - Manual (Page 54)

50
2 DHCP Client Setting
Connect the LAN cable before turning the
projector on. If not, the DHCP Client function
does not work.
Selectable items Description
On Obtains confi guration
parameters for TCP/IP network
automatically.
Off Sets the TCP/IP manually.
Select “On” for “DHCP Client”. “Obtaining IP
Address...” appears, then the menu screen
appears. Confi rm the parameters of IP
Address, Subnet Mask and Gateway on the
TCP/IP screen.
If the DHCP server is not available, “Could not
obtain IP Address.” appears.
In this case, set the TCP/IP manually. (See the
item
3.)
3 TCP/IP Setting
Set the TCP/IP manually.
1 Select “Off” for “DHCP Client”,
then press ENTER.
2
Select “TCP/IP”, then press
ENTER .
3 Enter “IP Address” using P, R, Q
and O, then press ENTER.
Setting the TCP/IP
Subnet Mask
IP Address
Gateway
1
5 5 . 2
9 2 .
0 0 0 .
1
5 5 . 2
6 8 .
0 0 0 .
1
5 5 . 2
5 0 .
0 0 0 .
0
0 0 0
0 2
0 0 0
Network
4
Enter “Subnet Mask” using P, R,
Q and O, then press ENTER.
5 Enter “Gateway” using P, R, Q
and O, then press ENTER.
1
2
3
4
5
Selectable items Description
IP Address Factory default setting:
192.168.150.002
Enter an IP address
appropriate for the network.
Subnet Mask Factory default setting:
255.255.255.000
Set the subnet mask to the
same as that of the computer
and equipment on the
network.
Gateway Factory default setting:
000. 000. 000. 000
* When not in use, set to “000.
000. 000. 000”.
Confi rm the existing network's segment (IP
address group) to avoid setting an IP address
that duplicates the IP addresses of other
network equipment or computers. If
“192.168.150.002” is not used in a network
with an IP address of “192.168.150.XXX”, you
don't have to change the projector IP address.
For details about each setting, consult your
network administrator. •
•
Note
4 Confi rming the
Projector Information
You can confi rm the MAC address and
projector name.
Selectable items Description
MAC Address The MAC address of the
projector is displayed.
Projector The projector name is
displayed.
For information on how to change the
projector name, see “SETUP MANUAL”
contained in the supplied CD-ROM. •
Note
Setting up the Projector Network Environment (“Network” Menu)
(Continued)
Menu operation n Page 38