Closed caption, Selecting the background image, Reversing/inverting projected images – Sharp PG-D40W3D User Manual
Page 48: Dlp® linktm, Dlp® linktm invert, Setting the video setup, Selecting the on-screen display language, Link, Invert, Language
44
6 Closed Caption
<For Americas only>
Info
This function is available for NTSC3.58 and 480
I
signals.
This function is available in the following cases
only:
Resize mode
Keystone Correction
Normal
Area Zoom
V-Stretch
-65 − +65
Stretch
-50 − +50
•
•
“Closed Caption” is a system which allows
conversations, narration, and sound effects in TV
programs (Limited regions) and home videos to
be viewed as captions on the screen.
Not all programs and videos will offer closed
captioning. Please look for the
symbol to
ensure that captions will be shown.
Two channels are available: CC1 and CC2.
The Closed Caption letters of this projector are
displayed in black and white.
Selectable
items
Description
Off
—
CC1
Closed Caption mode for CH1 data
CC2
Closed Caption mode for CH2 data
Closed Caption may malfunction (white blocks,
strange characters, etc.) if signal conditions are
poor or if there are problems at the broadcast
source. This does not necessarily indicate a
problem with the projector.
If any button is pressed to call up the on-
screen display while viewing a Closed Caption
broadcast, the closed captions will disappear.
•
•
Note
7 Selecting the Background
Image
Selectable items
Description
Logo
Sharp logo screen
Blue
Blue screen
None
—
•
•
•
•
8 Reversing/Inverting
Projected
Images
Selectable items
Description
Front
Normal image (Projected from
the front of the screen)
Ceiling + Front
Inverted image (Projected from
the front of the screen with an
inverted projector)
Rear
Reversed image (Projected from
the rear of the screen or with a
mirror)
Ceiling + Rear
Reversed and inverted image
(Projected with a mirror)
See page
for details of Projection (PRJ) Mode.
9 DLP
®
Link
TM
See the OPERATION MANUAL FOR
STEREOSCOPIC 3D PROJECTION provided
separately.
0 DLP
®
Link
TM
Invert
See the OPERATION MANUAL FOR
STEREOSCOPIC 3D PROJECTION provided
separately.
Setting the Video Setup
Selectable items
Description
0 IRE
Sets the black level to 0 IRE.
7.5 IRE
Sets the black level to 7.5 IRE.
This function is available for the following
signals.
With COMPUTER/COMPONENT 1 or 2 input:
- 480
I
With S-VIDEO or VIDEO input:
- NTSC3.58
•
Note
Selecting the On-screen
Display
Language
The projector can switch the on-screen
display language among 17 languages.
Adjusting the Projected Image (“SCR - ADJ” Menu)
(Continued)