Sony CDP-X5000 - Manual (Page 10)

Playing CDs
10 GB
Locating a Specific Track
You can quickly locate any track while playing a disc
by using the
= / + (AMS: Automatic Music
Sensor) buttons or the number buttons on the remote.
Locating a Particular Point in a
Track
You can also locate a particular point in a track while
playing a disc.
What is an index?
It is a number that divides a track or a disc into sections,
enabling you to easily locate a desired point. You can
determine if a disc uses indexes by its packaging.
Note
If “ ” appears in the display, the disc has reached the
end while you were pressing. Press 0 or = to go back.
Æ P p
)
)
0
0
+
c
=
C
MUSIC SCAN
>20
Number
buttons
·
= / +
To locate
The next or
succeeding tracks
(AMS)
The current or
preceding tracks
(AMS)
A specific track
directly (Direct
music selection)
By scanning each
track for 10 seconds
(Music Scan)
Press
+ repeatedly during playback until
you find the track
= repeatedly during playback until
you find the track
Number button of the track
1 MUSIC SCAN on the remote before
or during playback.
2 When you find the track you want,
press · to start playing.
Æ P p
)
)
0
0
+
c
=
C
0 / )
0 / ) S L O W C / c
To locate a point
While monitoring the
sound
Slowly by
monitoring the
sound
Quickly by observing
the display in pause
mode
Using an index (only
for indexed discs)
Press
+ (forward) or = (backward)
and hold down until you find the
point
0 / ) SLOW on the remote and
hold down until you find the point
0 / ) and hold down until you
find the point. You will not hear
the sound during the operation.
C / c o n t h e r e m o t e
repeatedly in playback or pause
mode until you find the point
To directly locate tracks numbered greater than 20
Press >20 on the remote first, then the corresponding
number buttons. To enter “0,” use button 10.
Example: To play track number 30
Press >20 first, then 3 and 10.
You can extend the playing time during Music Scan (or
in stop mode)
Press MUSIC SCAN on the remote repeatedly until the
playing time you want (10, 20 or 30) appears in the
display. Each time you press the button, the playing time
changes cyclically.
Each time you press MUSIC SCAN during scanning
playback, the playing time is extended by the displayed
time.
You can use music scan during repeat play, shuffle play
or programme play.