Siemens 600 Series - Manual (Page 101)

Making Calls 3–37
3. Making
C
alls
To dial using a
station speed
code ➩ Press the Station Speed (SPEED) key.
You will hear the confirmation tone, followed
by the internal dial tone.
➩ Dial the station speed code.
OR
➩ Get a dial tone.
➩ Dial # 3.
➩ Dial the station speed code.
To clear a station
speed code on a
display
telephone ➩ Press the PROGRAM key. The PROGRAM
status light turns on. PRESS FEATURE KEY
OR DIAL CODE is displayed.
➩ Press the Station Speed (SPEED) key you want
to clear, or dial # # 3. SPEED DIAL is
displayed.
➩ Enter the station speed code you want to clear
(0 through 9). The dialing sequence is
displayed. (You can view the contents of other
codes by entering their codes now.)
➩ Before NEW NUMBER? is displayed, press the
CLEAR key. DELETED is displayed.
➩ If you want to clear another station speed code,
press the STORE key. STORED is displayed.
Repeat the three previous steps.
➩ To end setup, press the PROGRAM key. The
PROGRAM status light turns off. STORED is
displayed.