Siemens 600 Series - Manual (Page 125)

Moving Calls 5–9
5. Movin
g
Calls
➩ Dial the extension to which you want your calls
forwarded. For all-condition forwarding (# 9 1,
# 9 2, # 9 3), you can dial 9 and an outside num-
ber as your forwarding target.
If your telephone has a FORWARD key, the
FORWARD status light turns on to
indicate that Variable Forwarding is active for
your extension. If you have a display telephone,
STORED is displayed, followed by the option
you chose and the number to which your calls
are forwarded.
You will hear the confirmation tone.
➩ Hang up. Your primary line key status light
flickers.
Note
A call made from your Variable Forwarding target to
your extension will always ring through.
You can only forward calls to an outside number if
your telephone has been assigned a special class of
service.
To cancel
Variable
Forwarding ➩ Press the FORWARD key. Your primary line
key status light and the FORWARD status light
turns off. If you have a display telephone, the
forwarding option and the number to which
your telephone was previously forwarded is
displayed, followed by OFF.
OR
➩ Get a dial tone.
➩ Dial # # 9 1.