Siemens 600 Series - Manual (Page 92)

3–28 ROLMphone 300/600 User Guide
To change your
saved number
manually ➩ Press the PROGRAM key. The PROGRAM
status light turns on. If you have a display tele-
phone, PRESS FEATURE KEY OR DIAL
CODE is displayed.
➩ Press the Saved Number Redial (SAV/RDL)
key, or dial # 4. If you have a display telephone,
SAVED NUMBER REDIAL is displayed
followed by either the saved number or
NOTHING STORED. NEW NUMBER is then
displayed.
➩ Enter the number you want to save. If you make
an error while entering the number, press the
CLEAR key to cancel your changes and then
enter the number again.
➩ Press the PROGRAM key. The PROGRAM
status light turns off. If you have a display tele-
phone, STORED is displayed.
Note
You can also assign a frequently used number to a
repdial key. (See “Repertory Dialing (Repdial)” on
page 3–23.)