Siemens 600 Series - Manual (Page 136)

6–4 ROLMphone 300/600 User Guide
Privacy
The Privacy feature lets you:
• prevent callers from using the Busy Override
feature to break through to your extension when
you are on a call
• prevent another party with the same multiple line
appearance from bridging (joining) your call
• prevent callers from queuing for your telephone
• exclude a party that has bridged (joined) your call
• put a call on private hold using only the Hold key
If your telephone has been set up at the CBX for Au-
tomatic Privacy, all calls you make are private unless
you turn off the Privacy feature.
If your telephone has been set up for Manual Privacy,
you must turn on the Privacy feature whenever you
want a call to be private.
When Privacy is on, the status light next to the Priva-
cy key is also on. If your telephone does not have a
Privacy key, ask your CBX system administrator if
your telephone has been set up for Automatic Privacy.
For further information about the features affected by
Privacy, see the following sections:
• “Bridged Call” on page 3–3
• “Busy Override” on page 3–5
• “Private Hold” on page 2–18
• “Busy Standby Queuing” on page 3–6
To turn on
Privacy during a
call ➩ Press the PRIVACY key, or press TRANSFR
and dial # 2. The PRIVACY status light turns
on. If you have a display telephone, STORED is
displayed.