Checking the play information, Searching for a particular point on a disc 19, Tv virtual surround sound settings (tvs) – Sony DVP-K360 User Manual

Page 36

Advertising
background image

36

Using V

arious Functions with the Contr

ol Menu

Checking the Play
Information

1 8 ( 3 4 )

1 2 ( 2 7 )

T 1 : 3 2 : 5 5

BIT RATE

DVD

Select:

ADVANCED

ENTER

BIT RATE

0

5

10

kbps

Mbps

0

1000

PLAY

You can check information such as the bit rate or the disc
layer that is being played.
While playing a disc, the approximate bit rate of the
playback picture is always displayed as Mbps (Mega bit
per second) and the audio as kbps (kilo bit per second).

Select “ADVANCED” after pressing DISPLAY.

x

ADVANCED

The default setting is underlined.

When playing a DVD
• OFF: turns off ADVANCED display.
• BIT RATE: displays the bit rate.
• LAYER: displays the layer and the pick-up point.

TVS (TV Virtual Surround) STANDARD
Uses sound imaging to create virtual rear speakers from
the sound of the front speakers (L, R) without using actual
rear speakers. The virtual speakers are reproduced as
shown in the illustration below. Use this setting when you
want to use TVS with 2 separate speakers and retain the
sound quality.

L: Left front speaker
R: Right front speaker

: Virtual speakers

Notes

• When you select an effect, the sound cuts off for a moment.
• When the playing signal does not contain a signal for the rear

speakers (page 32), the surround effects may be difficult to
hear.

• When you select one of the TVS modes, turn off the surround

setting of the connected TV or amplifier (receiver).

• Make sure that your listening position is between and at an

equal distance from your speakers, and that the speakers are
located in similar surroundings. Otherwise, the TVS effect may
be hard to discern.

• TVS NIGHT only works with Dolby Digital and MPEG audio

discs. However, not all discs will respond to the TVS NIGHT
function in the same way.

• If you use the DIGITAL OUT OPTICAL or COAXIAL connector

and set “DOLBY DIGITAL” to “DOLBY DIGITAL” in “AUDIO
SETUP,” sound will come from your speakers but it will not
have the TVS effect.

• Do not use the TVS function together with the KARAOKE

SURROUND function (page 49). You will not be able to enjoy
the surround sound effect presented by TVS.

TV Virtual Surround Sound Settings (TVS)

L

R

Advertising